Plastic plays a crucial role in our daily lives, but the current state of plastic waste is a cause for concern. The Circular Plastics Initiative, along with its partners, is supporting the mission to change the way plastics are used and waste is handled by transitioning from a linear to a circular system. This project has yielded important results that will help us achieve this goal.
In short:
- The relationship between the various players in the plastic packaging value chain is complex
- The choices made by one link can greatly impact the quality and quantity of plastic material
- Understanding these relationships will help us design the value chain to meet national and European circularity and climate targets
This project has led to a better understanding of the role each partner can play in moving from a linear value chain towards a circular value chain, as a result of good interaction and exchange of information among the consortium partners
Ronald Korstanje, Director of the Circular Plastics Initiative
What has been done?
The goal of this project was to gain a deeper understanding of the feedstock-process-output relationship of polyolefin-rich feedstocks using pyrolysis and gasification as processing techniques. The feedstock was derived from consumer-based packaging waste (PMD). Through the use of various sorting and washing protocols, we were able to deliver feedstocks with different compositions. Additionally, sorting tests were set up to understand the impact of newly designed products on the composition of the feedstock and processing. We also developed and evaluated new characterization techniques for sorting black plastics and created new algorithms to support better sorting. Pyrolysis and gasification trials were conducted at both lab and pilot scales, testing with different types of feedstocks and process settings. Finally, an environmental sustainability analysis of the entire chain was conducted.
The scientific output
On this project page you can find an overview of the leading results that have been achieved so far. But this is just the beginning – we have many more exciting updates and scientific outputs on the horizon. Keep an eye out for new research on topics such as the identification of black plastics, gasification, life cycle analysis for thermochemical recycling, and an efficiency analysis for pyrolysis and gasification. We invite you to keep following our project page for the latest developments.
On design for recycling and sortability
Sortability of packaging towards dummy plastic streams for chemical recycling
This study has determined the sortability of 16 different newly designed packaging materials to create 2 benchmark dummy streams, representing the composition of current and future household plastic packaging waste. Results show that in general, all packaging ends up in the 2D stream, and multilayer materials containing aluminium or PVC are difficult to sort.
Non-Negative Matrix Factorization and Systematic Simplification of Hyperspectral Images for High-Speed Plastic Sorting
The study proposes a two-step procedure using Non-Negative Matrix Factorization (NMF) and Convex-hull for simplifying and speeding up the analysis of large hyperspectral imaging (HSI) datasets for plastic sorting. It demonstrates that this method can increase the accuracy and efficiency of plastic sorting for the circular economy, by removing uninformative and redundant pixels and wavelengths from HSI data and selecting essential pixels/wavelengths from foreground objects.
Mono/Multilayered Plastic Sorting Based on Multi-Block Non-Negative Matrix Factorization
A new method called Multi-Block Non-Negative Matrix Factorization (MB-NMF) was developed for sorting mono/multilayered plastics which was found to have higher accuracy rate compared to existing methods.
On pyrolysis
Pyrolysis of mixed plastic waste (DKR-350): Effect of washing pre-treatment and fate of chlorine
This study investigates the results of pyrolysis of a post-consumer plastic waste stream (DKR-350) at laboratory scale. The research found that washing the DKR 350 feedstock effectively lowers the biogenic, inorganic, and halogen content but does not affect the yield of the desired oil/wax product (66-69 wt.%). The oxygen content of the oil/wax is also reduced during pyrolysis. However, the chlorine content in the oil/wax is still high, indicating the presence of recalcitrant organochlorines. This means that post-treatment still is required to upgrade the product before use in any application.
Pyrolysis of mixed plastic waste: Predicting the product yields
This study explores the predictability of pyrolysis results for mixed plastics. The study found that a linear model could accurately predict the oil/wax yield of mixed plastic streams, with a maximum deviation of 8%. However, the presence of significant amounts of a specific type of plastic, that is, PET, negatively impacts the production of the condensable product and promotes the formation of solid products beyond the expected predicted values. It is also found that the model could predict the aliphatic carbon yield in the condensable product from plastic waste streams with high accuracy. The study’s findings have important implications for the recycling and disposal of mixed plastic waste and the development of more efficient pyrolysis processes.
Be the change: join the Circular Plastics Initiative
Join the Circular Plastics Initiative today and be a part of the solution for a more sustainable future. This project, which recently concluded in December 2022, has yielded numerous innovative results in the processing of plastic waste through various methods such as gasification and pyrolysis.
But our work is not done yet, as we continue to strive for even greater understanding of the circularity of plastics.
Together, we can make a meaningful impact on reducing plastic waste and preserving our planet for future generations. Don’t miss the opportunity to be a part of this revolutionary movement. You can find our contactinformation below, of join our LinkedIn on plastics.
This is a project of the Circular Plastics Initiative, powered by ISPT and DPI.
You might also be interested in
Why are we still burning plastic waste?
124 million for the first phase of Circular Plastics NL
Recap: Circular Plastics Conference ’22
Liveblog: Circular Plastics Conference ’22
Plastics products: the need for knowledge-based design
Circular Plastics: the need for data monitoring and modelling
€220 million for development new circular plastic systems
Circular Plastics: how to make it feasible and affordable?
Let’s get in touch
Klaartje Rietkerken
Paco Rutten
Acknowledgement & partners
This project is co-funded with subsidy from the Topsector Energy by the Ministry of Economic Affairs and Climate Policy.
