BRECSIT – Bio-based REsin CompoSIte Technologies
Plantics-GX composites can replace conventional, fossil-based plastic composites.
ENCORE – nExt geNeration COmpRession hEat pump
This project demonstrates the enhancement of compression heat pump performance by using a pilot scale test unit.
Completed
Biorefinery Program
Biorefinery enables the production of healthy ingredients and the recovery of valuable components (i.e. proteins) out of process streams.
Completed
TENMIP – Testing and evaluation of nanofiltration membranes in industrial processes
Make very tight, low swelling NF or RO membranes for organic solvents, test them in process mixtures as present in industry and demonstrate / evaluate their economic feasibility on small...
Completed
Single Droplet Modelling
Multicomponent analysis of single droplet spray drying techniques and PhD research for the drying and dewatering program of ISPT.
Engender: Compact Energy Efficient Dryer
Engender works on an energy efficient drying method of foods. Expected energy savings are estimated up to 30%.
PROVE IT
PROVE IT is all about the technical feasibility of the production of methanol from CO2 waste gas.
Completed
ECWRTI – Electrocoagulation for Water Recycling in Textile Industry
The ECWRTI project is about closing the waterloop in the textile industry.
Completed
HF2N – High Flux 2D Nanosheet membranes
High Flux 2D Nanosheet membranes to demonstrate and validate the high potential of a new class of inorganic high flux 2D Nanosheet membranes on a practical scale
Completed
Hydrohub GigaWatt Scale Electrolyser
We are an important step further towards a Dutch hydrogen economy: the design for an advanced green hydrogen plant at large scale.
Completed
Measurements 4 Management
The aim of Measurement for Management (M4M) is to develop operational predictive technologies that (1) are transparent and include all available process information, (2) provide predictions of Key Performance Indicators...
Completed
PRIDES: Deep Eutectic Solvents in the Paper Industry
The European project cluster aims to approach 80% CO2 emission reduction in the lignocellulose processing chain.
Completed
Novel Process Routes – Reduction of energy use by novel process routes for food (ProFo)
Several partners are working towards a 50% reduction of energy use developing novel process routes in food processing.
Demonstration Polymer Heat Exchanger
The goal of this project is to demonstrate the innovative technologies as developed by HeatMatrix in the industrial process in the BioMCN factories. On the one hand this would result...
CMF – Controlling Multiphase Flow
This Industrial Partnership Programme aims at understanding the rheology of complex emulsions and their stability under flow. While there is much empirical knowledge about emulsion rheology and stability, the microscopic...
EEMS – Energy Efficient Milky Sprays
Spray drying is a very energy intensive process. EEMS is about energy efficient drying which can lead to 20% energy reduction.
Completed
Plasma Conversions
Industrial ammonia production is energy intensive and has a huge footprint. A plasma integrated water electrolyser provides an ecologically clean alternative process to Haber-Bosch.
BEAP – Bundled Early Adaptor Project
BEAP helps SMEs make contact with industries, localize and develop their technologies to suite the specific needs of Dutch industrial partners.
COMTA – COMpact modular Thermo Acoustic heat pump
To further develop the compact electrically driven thermoacoustic heat (TA) pump technology and to prepare for technical demonstration on full scale. The industry is a large consumer of energy and...
RMZD – Radial Multi-Zone Drying
The Radial Multi-zone Dryer (RMD) project investigates new type of spray dryer for premium product properties and low specific energy consumption.
LESSON – Oil free compressor for ammonia based high temperature heat pumps
Wet compression allows for close to isothermal conditions during compression resulting in higher compression isentropic efficiencies. It further prevents operation in the superheating zone of the working fluids of heat...
INSPEC – Integrating sensor based process monitoring and advanced process control
INSPEC quantitatively integrates information from state-of-the-art Process Analytical Technology, process measurements and dynamic process models (data driven or physics-based) into Advanced Process Control. This will induce a step-change with respect to...
Completed
Scissors – Super Critical Industrial Solution for Suspended Organic Residual Streams
Scissors researches the processing of specific wet waste streams through the potential of super critical water (SCW) technology.
Sussic – Sustainable treatment of industrial streams
In the Sussic project, atomic layer deposition (ALD) will be used for the development of SiC NF membranes, allowing treatment of challenging industrial streams.